News
2021-05-05 Infinity Chinese Miracle-2 MTK/MediaTek v2.23 - New models and features

Core
Changed: Protocol updated ( Raphael/Legacy )
NewSOC: ChipConfig for MT6833 activated ( under test )
Changed: BootHelper updated
Changed: Fixed SW reaction to conenction/power issues ( lags/stuck removed )
Changed: META core updated
! Allow connect from now to device, which already in META mode
! Identify by default not reboot device, other operations - reboot
Changed: Fixed Preloader mode handling on some driver versions
Changed: Fixed META init on some devices
Changed: SLA: Development feature to generate and send error reports automatically for unsupported devices
! No any data will be sent without user request

Flasher
Changed: UltraFlash engine updated

MemoryTool
Feature: Activated "Init GPT/PMT with resize" option
! Allow in some cases fix: Stuck/freeze/Rebooting issues on cheap encryption-enabled devices with cheap memory installed
! Issue found on MiPlay, some Infinix and other devices ( should work on more models range )
! Feature work by decrease UserData space size to avoid "bad blocks"

Service
Changed: SmartReset updated
Changed: SmartReset Extra mode updated
! SmartReset Extra acts like ordinary ones, but make additional, brand-required operations :
- Reset MiAcc for XIAOMI ( non-permanent )
- Reset FlyMe acc for MEIZU
- Reset DEMO mode on VIVO devices ( under test )
! Other, vendor-specific scripts can be included by users requests
Changed: "Restore Backup" option updated
! Clean and prepare files for correct restore in secure devices revised

Firmware Reader
Changed: New types supported
Changed: Internal Database updated

Other
Changed: Some general changes and fixes
Changed: Connection mode fixes

Read more here

2021-04-28 Infinity Chinese Miracle-2 MTK/MediaTek v2.22 - New models and features

As ordinary, unique functions and methods released

Core
Changed: Protocol updated (for Raphael/Legacy SoC)
Changed: Loader v2112 supported and tested
Changed: MediaTek MT6757 support revised
Changed: StandAlone SLA now activated in automatic mode for phones that need it
Changed: Driver dependency is not important any more, it gives more flexibility and more stable operations
Changed: EMI DB updated, BootHelper updated
NewChip:: MT3561/MT3561S supported (CardHeadUnit)

Flasher
Changed: Core updated for RAPHAEL SoC line
Changed: UltraFlash engine updated

MemoryTool
Changed: Long-range reading (over 32+ GB) optimized ( in most cases for Forensic cases )
Changed: LEGACY support revised

Service
Changed: SmartReset function process updated
Changed: New SmartReset mode activated - SmartReset Extra
! SmartReset Extra acts like ordinary ones but makes additional operations for specific brands:
- Reset MiAcc for Xiaomi ( non-permanent )
- Reset FlyMe acc for Meizu
! Other vendor-specific scripts can be included by users requests
Feature: "Restore Backup" option activated ( see Security tab )
! Automatic restore backup for connected device if this backup was already created earlier by Identify, Settings -> Autobackup option

Firmware Reader
Changed: Android 11 specific changes
Changed: Brand-specific changes and fixes
Changed: Better sparse handling
Changed: New types supported
Changed: Internal Database updated

Model DB
Changed: Changed acting model to semi-auto
! In most cases it is enough just to select required operation and connect devices ( BROM mode preferable )
! In some situations it may need to select older BASE DA for older SoCs ( LEGACY ones, since they are outdated )
Changed: New DA base v2112 included

Other
Changed: Number of small changes and fixes
Changed: Some unused options and checkboxes has been removed as deprecated, UI become easier


Here is virustotal report for people who care about safety. Be sure you do not use low quality antivirus tools - first 6 lines in given list gives false alert!

Read more here

2021-04-20 Infinity Dongle [Smart-Card] upgrade server got new features

- Advanced error check and recovery methods implemented
- Automatic Smart-Card recovery after lost Internet connection
- New Smart-Card types are supported
- Infinity DongleManager v1.81 (or higher) is required
- Updated Smart-Card firmware for renewed dongles released

Read more here

2021-03-17 SL3 service comes back

SL3 service comes back with new price, check price before make an order

2021-02-18 SL3 servcie delay

There is a some kind of unpredictable delay with SL3 service.
We are trying to solve it with all our efforts.
If your SL3 orders become delayed and you can not wait any more please contact to support for refund.
Default quoted time for new orders is 7 (seven) days !

Thank you for your kind understanding !

Read more here

2021-02-15 Smart-Card managemen engine become revised

Smart-Card management engine has been adjusted, OS firmware code optimization was finished and finally whole system become ready for new features.
To improve whole system stability and to free Smart-Card memory for new features some kind of legacy code will be removed from Smart-Card OS and previously released free test versions (several year old) will be removed step-by-step.

For end users it will be no any visible changes, the only exceptions are:
- Smart-Card update process will be little bit faster due to firmware code optimization
- Legacy free test software versions will be unavailable. As a replacement for legacy free test versions you can consider to order paid one anytime

Currently NO ACTION by users are required !
New features will be applied automatically as a part of regular Smart-Card update
Please DO NOT update Smart-Card until you will see explicit message that firmware should be updated

2021-02-10 Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.11 - Unlock, Repair, New CPU

As ordinary, unique functions and methods released

Core
Changed: FlashCore protocol updated
NewSOC: UMS9117 support ( service mode )

Flasher
Changed: Protocol updated
Changed: NVM manager updated

Firmware reader
Changed: Android 10 specific changes
Changed: UltraRead protocol updated
Changed: New types supported

Service
Changed: Repair : Security Repair allow now repair signed devices
- Permanent lock and other issues can be also fixed with that feature
- Repair can be done in Flash and Diag mode
- Repair support new security devices as well ( Android 10 + )
Changed: Repair : UMS9117 repair security support activated ( Nokia line supported included )
Changed: Identify : Enabled Read All Info by default under FlashMode
Changed: FormatFS : UMS9117 Reset/Format FS support activated

SPUnlock
Changed: UMS9117 support activated ( Nokia line supported included )
Changed: SC9863, SC9832 support improved

Other
Changed: Many internal changes and fixes
Drivers: UMS9117 drivers are at support area

Read more here

2021-02-01 Infinity Chinese Miracle-2 MTK/MediaTek v2.21 - MT67xx and MT81xx ON !

As ordinary, unique functions and methods released

Core:
Changed: Protocol updated ( Raphael/Legacy )
AUTH: MT6752 with any security configuration supported standalone !
AUTH: MT6753 with any security configuration supported standalone !
AUTH: MT6768 with any security configuration supported standalone !
AUTH: MT6757 support improved/fixed

Service:
Changed: Identify procedure revised
- Support modern Android 10 devices
- Support for Android 11 devices activated
Changed: SmartReset procedure
- Support modern Android 10 devices
- Support for Android 11 devices activated

Firmware Reader:
Changed: Android 10 specific changes for modern devices
Changed: Android 11 initial support
Changed: New types supported
Changed: Internal Database updated

ModelDB:
Changed: Some specific and brand list update

Other:
Changed: Many different changes and fixes

Read more here

2021-01-29 Infinity Chinese Miracle-2 MTK/MediaTek v2.20 - Standalone MTK auth ON - NEW CPU

As ordinary, unique functions and methods released

Core:
Changed: Protocol updated ( Raphael/Legacy )
AUTH: MT6752 with any security configuration supported standalone !
AUTH: MT6753 with any security configuration supported standalone !
AUTH: MT6768 with any security configuration supported standalone !
AUTH: MT6757 support improved/fixed

Service:
Changed: Identify procedure revised
- Support modern Android 10 devices
- Support for Android 11 devices activated
Changed: SmartReset procedure
- Support modern Android 10 devices
- Support for Android 11 devices activated

Firmware Reader:
Changed: Android 10 specific changes for modern devices
Changed: Android 11 initial support
Changed: New types supported
Changed: Internal Database updated

ModelDB:
Changed: Some specific and brand list update

Other:
Changed: Many different changes and fixes

Read more here

2021-01-28 Infinity Chinese Miracle-2 MTK/MediaTek v2.19 - Standalone MTK auth ON - NEW CPU

As ordinary, unique functions and methods released

Core:
Changed: Protocol updated ( Raphael/Legacy )
AUTH: MT6580 with any security configuration supported standalone !
AUTH: MT6735 with any security configuration supported standalone !
AUTH: MT6737 with any security configuration supported standalone !
AUTH: MT6731 with any security configuration supported standalone !
AUTH: MT6739 with any security configuration supported standalone !
AUTH: MT6750 with any security configuration supported standalone !
AUTH: MT6755 with any security configuration supported standalone !
AUTH: MT6757 with any security configuration supported standalone !
AUTH: MT6761 with any security configuration supported standalone !
AUTH: MT6762 with any security configuration supported standalone !
AUTH: MT6763 with any security configuration supported standalone !
AUTH: MT6765 with any security configuration supported standalone !
AUTH: MT6771 with any security configuration supported standalone !
AUTH: MT6785 with any security configuration supported standalone !
AUTH: MT6795 with any security configuration supported standalone !
AUTH: MT6797 with any security configuration supported standalone !
AUTH: MT8163 with any security configuration supported standalone !
Changed: BootHelper package updated
- Automatic Self-Learning function activated
- Do not need to make HWreport anymore before other operations in most cases !

Service:
Changed: META core updated
Changed: Security repair features rebuild. Bugfixes.

Firmware Reader:
Changed: Some modern brand-specific changes (Vivo, Meizu)
Changed: New types supported
Changed: Internal Database updated

Other:
Changed: Many different changes and fixes

Info:
Alternative MTK drivers package uploaded to support are, intstall it if you have any kind of connectivity issues

Read more here

2021-01-26 Infinity Chinese Miracle-2 MTK/MediaTek v2.18 - Standalone MTK auth ON - new models and features

As ordinary, unique functions and methods released

Core
Changed: Protocol updated ( Raphael/Legacy )
Changed: Loader v2044 supported and tested ( v2028 was unstable with MT6765 )
NewChip: MediaTek AC8227 (Car HeadUnits SoC) supported
NewChip: MediaTek AC8257 (Car HeadUnits SoC) supported

Flasher
Changed: Core updated for RAPHAEL line

Service
Changed: META core updated

Changed: HW Report ( RAPHAEL - only )
- LifeStatus identify revised, in some cases it may shown wrong info. Strongly recommend use latest version for HWcheck !
!* Feature also allow automatic select and store for further use BOOTROM connection settings for RAPHAEL devices (DRAM init)
!* HWreport not require complete boot in case of semi-dead devices, it is useful for HWdebug
!* HWreport result may vary in diffirent models and agents even on the same SoC !

Firmware Reader
Changed: Some modern brand-specific changes (Oppo, Realme)
Changed: New types supported
Changed: Internal Database updated

Model DB
Changed: New agents included for Tecno, Infinix ( with different SoC lines )
Changed: New DA base v2044 included

Other
Changed: GUI settings now stored and load select style, settings and other at next run
Changed: Environment compatibility issue with 32 bit OS has been fixed
Changed: Many different changes and fixes

Read more here

2021-01-23 Infinity Chinese Miracle-2 MTK/MediaTek v2.17 - Standalone MT67xx auth ON

As ordinary, unique functions and methods released

Core
Changed : Protocol updated ( Raphael/Legacy )
NewFeature: Standalone SLA/Auth [Raphael] **
Changed : Internal EMI engine updated : RAPAHEL : UFS support rebuild

Flasher
Changed: Core updated for RAPHAEL line
Changed: UltraFlash feature updated, new security workarounds supported

Service
Changed: Identify
!* Read new Android 10 specific fields, vendor-specific fields
Changed: Smart Reset
!* Optimized support for different customized and generic cases

Changed: HW Report ( RAPHAEL - only )
!* UFS line devices now supported with following features:
- CID info ( FlashIC base info, name, vendor ) - default info, even if boot can nott be completed by some HW or SW reasons
- LifeInfo ( SLC, MLC, EOL status and use counters ) - allow understand how bad it feels
- RPMB info ( is it key programmed or clean and can be re-used )
- Partitioning details and other
- HWreport log saving enabled ( for further analyze )
!* Feature also allow automatic select and store for further use BOOTROM connection settings for RAPHAEL devices ( DRAM init )
!* HWreport not require complete boot in case of semi-dead devices. Useful for HWdebug
!* HWreport result may vary in diffirent models and agents even on the same SoC !

Firmware Reader
Changed : Some modern brand-specific changes ( Xiaomi, Oppo, Vivo, Realme )
Changed : New types supported

Other
BugFix : Many different minor changes and fixes
Changed : Generic protocol rebuild

Info
!**
- Standalone SLA/Auth allow you ignore device security setting and allow boot it without having any DA/Auth/Remote auth support
- You can boot ( with supported SoC ) device with any generic da and perform any need operations
- Support MT6765 - All security versions, no auth need, no special da need, no remote service need
Support Xiaomi, Oppo, Vivo, Realme, Huawei and whatever else existing
- Support MT6785 - All security versions, no auth need, no special da need, no remote service need
Support Xiaomi, Oppo, Vivo, Realme, Huawei and whatever else existing

NOTE: special boot-helper tool should be installed - included in CM2MT2 package

Read more here

2021-01-19 Infinity Data Explorer v1.11 - MTK, SPD updated and more improvements

Data extraction based on full reconstruction of file system

- MTK module updated - added Call List extraction for some models
- SPD firmware structure detection improved, important algos and methods updated
- Minor bugs fixed

Read more here

2021-01-02 Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.10 - New year means new features !

As ordinary, unique functions and methods released

Core
Changed : FlashCore protocol updated
NewSOC: UniSOC Tiger T61x series support
NewSOC: UniSOC UIS7862 (Car HeadUnits SoC) series support
NewSOC: SC7731E Android 10 / FastProto supported
NewSOC: SC9832E Android 10 / FastProto supported

Flasher
Changed : Protocol updated
Changed : NVM manager updated
Changed : FastFlash protocol updated ( SC7731E, SC9832E supported )

Firmware reader
Changed : Android 10 specific changes
Changed : Initial Tiger and NaT devices support
Changed : UltraRead protocol updated ( SC7731E, SC9832E supported under 0S loaders now )

Service
NewFeature: Security Repair allow change PSN1/PSN2
- In newer devices PSN1/2 damage may lead to bootlop, ota and other issues
- In newer devices PSN1/2 used as bootloader token
Changed : Identify : Correct MEMORY and RAM size reading for Android 10 devices
Changed : Identify : Read PSN1 and PSN1
Changed : Identify : SC9832E and SC7731E can be used to verify eMMC ReadOnly state (0S loader mode)
Changed : Repair : Identify signed devices during repair
Changed : NVM : Read and Write operations revised

UserData
Changed : UserData dump feature updated ( Legacy line fixes )

SPUnlock
Changed : SC9863 support updated
Changed : SC9832 support updated
Changed : PermLock fix ( processed in automatic mode, fix issue with possible PermLock after first unlock try )
NewFeature: Error codes explanation and hints
NewFeature: Damaged devices ( security destroyed ) detection
NewFeature: Damaged devices ( permLock ) detection

Model DB
Changed : New generic loaders included for SC7731E with Android 10 ( 0S type )
Changed : New generic loaders included for SC7792E with Android 10 ( 0S type )
Changed : New generic loaders included for Tiger T61x
Changed : New generic loaders included for UIS7862
Changed : ZTE, Itel and others line loaders updated to support faster operatons amd more HW variants

Other
Changed : GUI settings now stored and load select style, settings and other at next run
Changed : Lot of different changes and fixes

Read more here

2020-12-31 Server algorithms for SPD unlock updated

Server algorithms for SPD unlock updated with important improvements.
No need to update CM2SPD software at the moment, CM2SP2 v2.09 can handle process well.

2020-12-19 Infinity Facebook group

Read more here

2020-12-15 Infinity Chinese Miracle II SCR/SPD-RDA v1.07 - RDA8955x CPU line supported

As ordinary, unique functions and methods released

RDA8955x is an extra cheap SoC with 2G/GPS support.
It is used in cheap wearable, IoT and feature phones.

Supported CPU list:
Spreadtrum: SC6530, SC6531, SC6531(A/C/D)
SpreadTrum: SC68xx ( with external PAC )
SpreadTrum: SC770x ( with external PAC )
UniSoc: SC6531E, SC6533, SC6533G, SC770x
RDA Mirco: RDA8955G, RDA8955GE, RDA8955L
RDA Mirco: RDA8851 rev A,B,C,L,CL
RDA Micro: RDA8826

Core
NewChip: Support RDA 8955 Line (8955G, 8955GE, 8955L)
BugFix: Support for some SC6533 revisions fixed ( Wrong PMT issue )

Support RDA 8955 Line (8955G, 8955GE, 8955L)
- Identify ( Security info, compilation info, Hwinfo )
- Format FS / Reset Settings
- Read UserCode / PrivacyCode
- Repair Security
- Read Flash / FW
- Write Flash / FW / LOD

Service
Changed: CompileInfo extraction improved ( RDA / SPRD / UniSoc )
Changed: BOOTROM support improved ( RDA )
Changed: SVC ( Diag ) mode support optimized for modern UniSoc 89xx platforms

UserData
Changed: Security code read in FlashMode revised ( RDA )

Other
BugFix: Lot of small different changes and fixes
Option: GUI ( File -> GUI ) : allow select other interface mode
!* Default - standard V2 line GUI
!* Wide - best for big screen / big distance to monitor
!* Wide Log - extend log window to screen size. Optimal for most cases

Read more here

2020-11-03 Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.08 - NAND, Forensic and more features !

As ordinary, unique functions and methods released

Core
Changed : FlashCore protocol updated
Changed : NAND support rebuild
Changed : X64 SS/RS loader line handling optimized
NewSOC : SC9820E with NAND support
NewSOC : SC7731E with NAND support

Flasher
Changed : NAND support rebuild
Changed : Big files handling optimized
Changed : NVM manager updated

Firmware reader
NewFeature : UniSoc NAND SC9820E/SC7731E support activated!
- Allow backup FW from range of phones, based on SC9820E/SC7731E SoC with NAND flash memory
- Firmware is complete, not damage any security, ota or any other compatibility
Changed : Improved structure identification
Changed : Forced reading ( disable deep verify ) option enabled - Use WITH CAUTION!
Changed : Android 4.x / Mocor 5 specific changes
Changed : UBI defragmentation for NAND devices activated by default

Service
NewFeature : Security Repair allow change BT/WiFi MAC
- Useful only in DiagMode for UniSoc(E-line), Flash/Diag for SPRD line
Changed : Security Repair options - Generate MAC's - double click at MAC field to generate and activated
Changed : Security Repair options - AutoIncremental set SEC2/SEC3 fields, when SEC1 set. Just double click in next field
Changed : Security Repair : NVM Manager updated according latest devices changes
Changed : Identify : Support identify for UniSoc NAND line
Changed : Identify : NAND identify speed increased

UserData
Changed : Privacy reading types increased to 4 ( +2 new types )
NewFeature : UserData DeepVerify and DUMP activated!
- Available for users with active Infinity Data Explorer module!
- Ignore ALL sprd protocol limitations, which require MEMORY DESOLDER and EXTERNAL MEMORY PROGRAMMER using!
- Allow verify and dump COMPLETE USER image for wide range of types and filesystems
1. eMMC with EXT3/EXT4 filesystem. FDE check may differs from Identify!
2. eMMC with F2FS filesystem. FDE check may differs from Identify!
3. NAND with UBIFS. Result image defragmented and prepared for further forensic analyze
- Internal checks during dumping make differ, than Identify option, analysis. Even if Identify say FDE - device can be not encrypted.
- Ability to resume dumping in case of read fails, can be used much times, as need
- After dumping device must be flashed!
1. Get FW or make FW backup from WORKING/GOOD device with complete options if SW asks
2. Complete Flash device
or
2. If need revert device to initial state
2.1 : Select FW, uncheck all items ( Rmouse - > Uncheck all )
2.2 : Select UBOOT/SPL
2.3 : All other settings must be default, not touch anything
2.4 : Flash device

Model DB
Changed : New generic loaders included, changes some existing once for better compatibility
Changed : Generic SC9820E NAND loaders included
Changed : Generic SC7731E NAND loaders included

QIN QF9 ( QIN1 SC9820E ) - full support : Read/Write FW,Reset Settings,Security,Service
- Firmware can be found on support area
- Boot key : Call button
- Change Lang sequence : Ok, Left, down, ok, 15 times - down, ok, ok, select need language ( English )

Read more here

2020-10-22 Infinity Online Service (IOS) updated

- New product available - TFM-Tool software license
- AMT Dongle Special Offer (discount price) extended up to 19 Nov 2020

2020-10-13 Infinity Chinese Miracle-2 MTK/MediaTek v2.16 - Another step forward

As ordinary, unique functions and methods released

Core
Changed : Protocol updated ( Raphael/Legacy )
BugFix : MT6737M/MT6580
Changed : Internal EMI engine rebuild
!* LEGACY line : DB rebuild and updated, changed and optimized selection features
!* RAPAHEL line : DB rebuild from scratch. Selection feature rebuild. Manual mode removed and changed to automatic.
Summary :
!* Supported almost all existing memory/dram combinations up to current date for LEGACY lines
!* Supported almost all existing memory/dram combinations up to current date for RAPHAEL lines ( up to DIMENSITY line )
!* REMOVED manual EMI selection by bruteforce. NOT NEED ANYMORE set one-by-one internal EMI db counter and boot device every time. All auto.
!* In rare case of discrette DRAM may require change EMI once for some specific devices
!* After device learning ( via HW report feature ) it will be stored in SW Database and used automatic at every service/flash/repair operation
!* Overall : Not need seek compatible preloader files for new/not existing FW's devices, spend time to bruteforce and etc. Just connect and work!

Flasher
Changed : Core updated for LEGACY line
BugFix : MT6737 with Android 10 flashing revised
BugFix : Checksum verify rebuild
BugFix : Changed memory repartition model for modern scatter formats ( used in Android 10 FWs )
BugFix : Different scatter-version dependencies handled now correct
Changed : Core updated for RAPHAEL line
Changed : UltraFlash feature updated, new security workarounds supported

Service
Changed : Identify
!* Legacy platform changes, mostly for Android 10 devices
Changed : Smart Reset
!* Optimized support for different customized and generic cases

NewFeature : HW Report ( RAPHAEL - only )
!* Allow read extended info from device about its HW
- EXTCSD info ( complete, include eMMC version, all flags etc. ) - used in case of identification for HWrepair purposes
- CSD info ( complete, TEMP/PERM write protection status ) - used in case of identification ReadOnly state in some cases
- CID info ( FlashIC base info, name, vendor ) - default info, even if boot can nott be completed by some HW or SW reasons
- LifeInfo ( SLC, MLC, EOL status and use counters ) - allow understand how bad it feels
- RPMB info ( is it key programmed or clean and can be re-used )
!* Feature also allow automatic select and store for further use BOOTROM connection settings for RAPHAEL devices ( DRAM init )
!* HWreport not require complete boot in case of semi-dead devices. Useful for HWdebug
!* HWreport result may vary in diffirent models and agents, even on same SoC!

Firmware Reader
Changed : LEGACY line support updated ( Android 10 line )
Changed : Support more different types
Changed : FileSystem tools updated. Issues with reading on some systems should be fixed.
Changed : More wide range of scatter versions creation according device specific data

Other
BugFix : Lot of minor changes and fixes
Option : GUI ( File -> GUI ) : allow select other interface mode
!* Default - standard V2 line GUI
!* Wide - best for big screen / big distance to monitor
!* Wide Log - extend log window to screen size. Optimal for most cases

Info
!* Strongly recommend to use ONLY Infinity or Factory firmwares for modern Android 9/10 device to avoid lot of issues
- FOTA issues
- Attestation Key Issues
- Tee Key issues
- Security issues

Read more here

2020-09-16 Smart-Card update procedure for several card-reader types

If you have the card-reader mentioned below and last Dongle firmware update attept was failed do the next:
- Insert smart-card into another card-reader
- Update Dongle firmware: do it ONLY ONCE even in case of error

The next card-readers shold be moved to TRASH immediatelly:
- USB Fenix Card Reader
- DITS CCID Smart Card Reader
- DITS Ezy Smart Card reader Module SC

2020-09-07 Infinity Online Service (IOS) updated - new software activation available

AMT-Dongle software activation for Infinity users is ready, you can activate this software for any Infinity product smart-card

Read more here

2020-07-28 Infinity Chinese Miracle-2 MTK/Mediatek v2.14 released - UltraFlashing activated !

As ordinary, unique functions and methods released

Core
Changed : Protocol updated ( Raphael/Legacy )
NewChip : MediaTek Dimensity line ( MT68xx ) support under test

Flasher
New Feature : UltraFlash - UNIQUE FEATURE !
!* ALLOW IGNORE MOST EXISTING SECURITY/FUSE/DA RESTRICTIONS and forcedly flash protected regions
!* Feature support Whole RAPHAEL line from MT6731 to MT6785. Vendor and security settings configuration in most cases is not important.
!* FEATURE CAN FLASH ANYTHING SIGNED/UNSIGNED TO PROTECTED AND/OR VERIFIED REGIONS
!* Tested with Huawei, Vivo, Infinix, Tecno "protected" and other models
!* Feature may not work in some "exotic" secure/da/fuse configurations and cases!
!* Feature not work with "remote authentificated" devices yet!

Service
Changed : Reset PrivacyLock updated
!* Action selection now depend on different factors ( Android 6, 9 issues fixes )
Changed : Smart Reset
!* Optimized support for Android 5, 6
!* Optimized support for "customized" cases

Firmware Reader
Changed : Improved structure identification
Changed : Support more different types

Model DB
Changed : New agents included for Tecno, Infinix devices devices ( G70/G80/G90 )

Other
BugFix : Minor changes and fixes

Read more here

2020-07-14 Infinity Chinese Miracle-2 MTK/Mediatek v2.13 released - Android 10 and new SoC types

As ordinary, unique functions and methods released

Core
Changed : Protocol updated ( Raphael/Legacy )
NewChip : MediaTek MT8765 supported
NewChip : MediaTek MT8766 supported
NewChip : MediaTek Helio G70 supported
NewChip : MediaTek Helio G80 supported

Service
Changed : Identify
!* More accurate FS state detection
!* Support for different "customized" devices identify - Huawei and similar
!* Support for A/B structure devices for read complete info - Nokia, Doogee, Infinix and similar
!* Support GSI/Trebble devices for read complete info
!* Android 5/6 devices fixes

Changed : Smart Reset
!* Optimized support for Android 5, 6, 10
!* Optimized support for "customized" cases - Oppo, Vivo, Huawei and similar
!* Optimized work with GSI/Trebble/A/B devices

Firmware Reader
New Feature : Android 10 supported!
!* Read FW result is completely factory-like
BugFix : Work with big partitions ( more than 4 GB )
Changed : Logical FileSystems sparsing supported
Cahnged : More intellegent identify of unknown layouts
Changed : Improved structure identification
Changed : Support more different types
Changed : Android version-depend additional data creation

Model DB
Changed : New agents included for Xiaomi devices ( G70/G80/Dimensity )

Other
BugFix : Minor changes and fixes
GUI : Store last used FormatMode enabled

Thanks to : kamal_singla, gracy_elec and all other friends !

Read more here

2020-07-01 Infinity Chinese Miracle-2 MTK/Mediatek v2.12 - F2FS support, EncryptInfo and more

As ordinary, unique functions and methods released

Core
BugFix : Some legacy chips support may broken, fixed (Agent 19xx-20xx)
BugFix : BROM mode support fixed for MT6752/MT6753

Service
Changed : Identify procedure updated, read more useful info on Android 10 devices
!* From now on for modern Android ( 7 - 10 ) shown more detailed UserData state with encryption methods
!* That replace old ENCRYPTED/PLAIN states to avoid false-positive results for forensic cases
!* It may work not stable on earlier Android releases, it is recommend to check state also via MemoryTool if required
New Feature : Smart Reset ( Format FS option )
!* Support RAPHAEL line in SMART mode, not need change any options
!* Function detect correct settings automatically to avoid user from mistakes
!* Function detect correct file systems, include modern F2FS, and all variants of EXT filesystem to support wide range of old and modern devices
!* Function detect and reset all settings, include FRP and Privacy Locks ( for USER DATA SAFE methods - USE SEPARATE OPTION!!!!! )
Changed : META : Attestation Keys download procedure updated

Firmware Reader
New Feature : F2FS file system detection and creation supported
Changed : Improved structure identification
Changed : Support more different types
Changed : Combo scatter creation revised
Changed : Platform and version depend scatter creation for better compatibility with SPFT
Changed : Android version-depend additional data creation

MemoryTool
Changed : Structure identification
New Feature : Build FILE SYSTEM at selected partitions
!* Allow make F2FS, EXT4 old and EXT4 modern variant of filesystem at selected partition
!* Select need partition ( for prevent mistakes - just one partition per operation allowed ) and desired filesystem
!* Useful also in case of unlocked devices with change FS or encryption method needs

Flasher
New Feature : Android 10 specific changes on verification and file selection
Changed : Selection order modified according last changes of build SDK's and vendor-specific cases
Changed : Scatter tab changes, specific to multi-storage selection and settings

Model DB
Changed : New agents included for Tecno, Infinix, Itel, Panasonic, Walton brands ( with different SoC lines in every )

Other
BugFix : Minor changes and fixes

Read more here

2020-06-22 Infinity Data Explorer v1.08 - Search Engine updated, SPD improvements and more

Data extraction based on full reconstruction of file system

- SPRD engine rebuilded
- contacts save method updated
- long SMS parse method updated
- HTML export released (via templates)
- gui: log autoclear option before new operation
- gui: pop-up menus for log (clear and save options)
- folder with date/time creation for Converter
- Minor bugs fixed

Read more here

2020-04-22 Information about Infinity products support period renew due to situation with COVID-19

Two months support period extend for free for all users

Read more here

2020-04-18 DongleManager v1.76 released

- minor gui changes
- external activation detection method updated

2020-04-01 Special offer for users/sellers with Infinity Lanaguage Editor smart-card dongle and/or Infinity Content Extractor smart-card dongle on hands

If you are an owner of a separate Infinity Lanaguage Editor smart-card dongle and/or separate Infinity Content Extractor smart-card dongle there is an option to convert that dongles to Infinity-Box/Dongle or to Infinity [BEST] dongle with small charge.

Read more here

2020-03-16 Infinity Data Explorer v1.07 - SPRD engine rebuilded and more

Data extraction based on full reconstruction of file system

- SPRD engine rebuilded
- contacts save method updated
- long SMS parse method updated
- HTML export released (via templates)
- gui: log autoclear option before new operation
- gui: pop-up menus for log (clear and save options)
- folder with date/time creation for Converter
- Minor bugs fixed

Read more here

2020-03-11 Infinity Data Explorer v1.06 - Android contacts/sms support and more

Data extraction based on full reconstruction of file system

- Contacts and accounts reconstrucion from Android storage contacts2.db
- SMS messages reconstrucion from Android storage mmssms.db
- Data storage engine rebuilded
- TXT file storage format updated
- Minor bugs fixed

Read more here

2020-02-24 Infinity Data Explorer v1.05 - MTK functions for SMS released, Heuristic engine updated

Data extraction based on full reconstruction of file system

- SMS extraction for MTK activated, supports multipart sms supported as well
- Heuristic engine updated - more data can be found/extracted from the unknown dumps
- GUI improved
- Minor bugs fixed

Read more here

2020-02-02 Infinity Online Service (IOS) updated

New products: Xiaomi Mi Account remove any model (clean only) - Russia, Ukraine, Turkey, Kyrgyzstan, Kazakhstan, EU countries, Belarus, Nepal, India

2020-01-27 Infinity Online Service (IOS) updated

New product - Xiaomi Find Device check Clean or Lost status

2020-01-14 Advertize your YouTube channel with Infinity software video

Advertize your YouTube channel with Infinity software video

Read more here

2020-01-12 Infinity Chinese Miracle-2 SPD/UniSoc v2.04 - Xiaomi, KaiOs, RepairSec, PACv2 and more

As ordinary, unique functions and methods released

- Support for PACv2 format activated
- Core updated
- Protocol updated
- SC9820E support activated ( Generic and Secure types )

- Repair security option activated
Allow repair device security items on generic devices
Work in Flash mode
Work in DiagChan mode
SimLock-enabled devices may NOT work
Security-enabled devices will NOT work

- Firmware Flasher updated
Updated core
Updated PAC types support
Revised NVManager

- Firmware Reader updated
More accurate data verification
Reading speed optimized for some UniSoc models
Android version-depend mode activated ( allow avoid flashing issues on android 9 and newer )
KaiOS devices supported ( SC7731E eMMC, SC9820E eMMC tested and working ) now for Read Firmware

- Identify procedure revised
Now it also support for security verification ( signed NV )
Better FS state verification
More usable build props info extraction

- Revised manual mode selection and possible combinations ( can combine firmware and loader from any source )

- Loader database
SC7715 eMMC loaders included
SC9820 loaders updated
SC9863 loaders updated
SC9820E eMMC loaders included
Various range of models from Wiko, LYF, BLU, BQ, Symphony, Itel and others included in DB

- Other
Bug fixes and changes according users requests

- Extra
Xiaomi QIN 1S+ supported ( Identify, Repair, Firmware Reading, Reset Settings ) BKey : Call button
Xiaomi QIN 2 supported ( Identify, Firmware Flash, Repair, Firmware Reading, FRP, Reset Settings ) Bkey : Assistant button
Xiaomi QIN 2 Pro supported ( Identify, Firmware Flash, Repair, Firmware Reading, FRP, Reset Settings ) Bkey : Assistant button

Special thanks to respected Mr. gracy_elec

Read more here

2020-01-08 Infinity-Box [BEST] NK2 v1.20 - 220.4G, 2.3 and more !

HMD Nk 220 4G (2019)
Nk 220 4G - TA-1148, TA-1155, TA-1171
- Identify, check securiy
- Reset Settings/Format FS
- Read UserCode
- Backup security

HMD Nk 2.3 Ironman
Nk 2.3 - TA-1206, TA-1209, TA-1211, TA-1214
- Identify
- Flash Firmware
- Reset Settings/Format FS
- Reset FRP

- Base
Loader database updated
ModelFinder updated
Bugfixes and minor changes

- MTK SP
Flash Engine updated
Updated loader database
Nk 2.3 support activated in standalone mode

- SPD FP
SVC engine updated
Nk 220 4G support activated ( partial )
UserCode reading revised
Identify revised

- Support
New firmwares for supported models can be found at support area
New drivers for 105/110/220 can be found at support area

Read more here

2020-01-07 Updated SPRD drivers

Updated SPRD drivers uploaded to support area.
Please read note before use !

2020-01-06 Support area updated with new flash files

Support area updated with new flash files

2020-01-05 Laelo tool new version 0.75 released

Laelo tool new version 0.75 released

Read more here

2019-12-27 Infinity Data Explorer v1.03 - RDA based firmware images are supported and more

Data extraction based on full reconstruction of file system

- MTK module improvements
- RDA based firmware images are supported
- Show Additional info (IMEIs, User Code) for RDA based firmware images
- GUI improvements
- Minor bugs fixed

Read more here

2019-12-18 Infinity [BEST] support/renew policy updated

Please review updated support policy by link below. Thank you for your kind understanding and cooperation !

Read more here

2019-12-18 Infinity Chinese Miracle-2 MTK/Mediatek v2.07 - New models and features

Core:
NewSOC : MT6785 support under test
NewSOC : MT6885 support under test
Changed : Protocol updated for RAPHAEL line
Changed : Protocol updated for LEGACY line
BugFix : MT6752 support fixed
BugFix : MT8172/MT8173/MT8176 BROM support fixed
BugFix : MT6570 support fixed
Changed : EMI engine revised
Changed : AutomaticBoot selection revised. More types and combinations are supported.
Changed : Loader v1924 supported and tested
Changed : Loader v1936 supported and tested
Changed : Loader v1944 supported and tested

Flasher :
New feature: unmerged signature support
- Files with external signatures now flash correctly
New feature: Forced mode for Raphael line
- Allow automatically skip repartition, erase operations if it was not allowed without break flashing
New feature: WHOLE Flash Pre-Erase
- Erase whole USER region. Destroy ALL data include unique and secure one! Support both Modern and Legacy lines.
Changed: Repartition procedure rebuild to support modern devices and special cases (user memory issues and other fixes)
New feature: Smart erase
- In manual mode selection and enabled pre-erase all unchecked partitions will not be touched
- Storage boundary checks now works correct on legacy and modern lines

Firmware Reader / Maker:
Changed: Local DB updated to latest version
Changed: Scatter creation support latest platforms and variants
Changed: Scatter compatibility with SPFT optimized ( for DL only mode )
New feature: FileSystem creation and params now generated according Android version
New feature: Ability to skip "critical" partitions verification during read ( bl-unlocked devices and specific cases )

MemoryTool:
New feature: Switch working mode ( ADR - PRT options in global settings ) without tool restart (no need to exit and run software again)
New feature: Error ignoring on RAPHAEL line devices. Errors are not triggers shutdown anymore.
Changed: Update PMT operation rebuild. Support modern devices and use multiple factors now.
Changed: Init preloader operation. Support plain preloader dumps that was created by MemoryTool.
Changed: Partition listing style on LEGACY devices. In case of protected regions do not triggered shutdown anymore.
Changed: Write operation now handle correctly some sparse images used in Android 9 and newer versions

Service:
BugFix: Format FS procedure updated
BugFix: Reset FRP procedure updated
BugFix: Identify procedure updated and revised
New feature: eMMC life counter check during Identify
- Show, if possible by Agent or HW, storage life status. LifeCycleEnd(ReadOnly), LifeCycleNearEnd states.
- Support only Raphael newer than MT6739. Support NAND devices as well ( MT6570 )

UserData:
New feature: Reset Privacy Locks
- Support old and modern devices. Procedure is USERDATA SAFE if that required

LoaderDatabase:
Base Loader v1924 included
Base Loader v1936 included
Base Loader v1944 included
New TECNO sec agents included
New VIVO sec agents included
New ALCATEL sec agents included
New Hisense sec agents included
New Moto sec agents included
New Huawei sec agents included
New Lenovo agents included
And other different and generic models can be found in list

Other:
Changed: Base DB revised, unused and "buggy" types removed from BASE agents.
- Change settings if DA version not contain your device platform
Changed: EMIDb updated, more types supported
Changed: Preloader parser now shows more complete memory details

Thanks to:
Special thanks to respected Mr. gracy_elec
Special thanks to respected Mr. Kamal_singla

Read more here

2019-12-16 Infinity Data Explorer v1.02 - more devices and CPU types supported

Data extraction based on full reconstruction of file system

- MTK module updated: more device supported
- SPD based firmware images are supported (spd6530 - spd6531 cpu)
- Show Additional info (IMEIs, User Code) for SPD based firmware images
- Contacts save procedure improved
- GUI improvements
- Analyze engine improvements
- Minor bugs fixed

Read more here

2019-12-04 Infinity Data Explorer v1.01 - new features and improvements

Data extraction based on full reconstruction of file system

- NAND flash types are partially supported
- Additional information extraction supported such as IMEI(s), User Code
- More contacts types are supported
- Open folder with result file(s) after finish: option can be enabled in `Settings` page
- Minor bugs fixed

Read more here

2019-11-27 Infinity Chinese Miracle-2 SPD/UniSoc v2.03 - Easy Identify, New models & features

- Core
Protocol updated
Error handling, error explanation and hint module updated

- Service
NVM operations revized
DiagMode option activated ( Platform -> Control -> DiagMode )
> Change SW mode to diag, instead of flash. Do not require BootSelection.
Allow for now:
1. Identify Device - ModemInfo, Build Info, SecurityInfo, SOC Info, DeviceHW Info
2. Format FS / Reset settings ( NOT touch FRP! ) - WIPE mode
3. Read NV data, verify NV
> Don't forget change SW mode between Service/Flash for those operations !

New Identify option - device Platform, Device HW details identification
> Allow detect device SOC family, RAM amount for faster loader selection
> Work in DiagMode, Work ON MODERN and UNISOC chipset only !

- Flasher
Optimized flashing protocol
Optimized older device line support
NVManager updated - Identify, Backup, Security swap
NVManager Recovery tool updated

- Firmware Reader
Optimized structure identification
Activated "forced" reading. Option skip data verification.
> In case of semi-damaged devices, if backup atleast of something required
> In case of "Critical data damaged" errors
Optimized data verification during create FW

- Database:
SC983xx generic loader DB updated
SC9853i generic loader DB updated
SC7731E generic loader DB updated
SC7731x generic loader DB updated
SC9863 loaders DB updated - BQ, Wiko, ZTE, Symphony
SC7731c/g loaders DB updated - various models and RAM size
SC9832E loaders DB updated - Meizu, Wiko
Some other various models with specific hw settings included in loader DB

- Other
Boot Selection mode are indepedent ( loader base can be changed after FW selection, in Platform tab )
Bug fixes and changes according users requests

- Special thanks to respected Mr. gracy_elec

Read more here

2019-11-24 Infinity Data Explorer v1.00 - Initial Release

- Data extraction based on full reconstruction of file system

- Initial features
1. Phonebook records extraction from dump
2. Phonebook records export to TXT, VCF formats
3. Memory type auto detection (Manual selection also supported)
4. File system parameters (sector size, header type) auto detection (Manual selection also supported)

- Supported devices:
MTK with NOR flash types, in most cases based on CPU types like MT625x, MT626x, and some MT622x

Read more here

2019-11-18 Infinity-Box [BEST] NK2 v1.19 - New models and features

HMD Nk 105 (2019) King
Nk 105 - TA-1174, TA-1203
- Identify, check securiy
- Reset Settings/Format FS
- Read UserCode

HMD Nk 110 (2019)
Nk 110 - TA-1192
- Identify, check securiy
- Reset Settings/Format FS
- Read UserCode

HMD Nk 6.2 Starlord
Nk 6.2 - TA-1187, TA-1198, TA-1200, TA-1201
- Identify
- Flash Firmware
- Reset Settings/Format FS
- Reset FRP

HMD Nk 7.2 Daredevil
Nk 7.2 - TA-1178, TA-1181, TA-1193, TA-1196
- Identify
- Flash Firmware
- Reset Settings/Format FS
- Reset FRP

- Base
Loader database updated
ModelFinder updated
Bugfixes and minor changes

- BL
Fixed Nk 2.2 flashing, Format FS, Reset FRP

- MTK SP
Updated loader database
MT6761 support activated ( Nk 2.2 line ) in standalone mode

- MTK FP
FlashEngine updated
FileSystem (Forensic) engine updated

- SPD FP
FlashEngine updated
Nk 105, Nk 110 support activated ( partial )

- Support
New firmwares for supported models can be found at support area

Read more here

2019-10-31 Infinity Online Service (IOS) updated

New product - Xiaomi country check by 12-symbols unlock-number

2019-10-29 Infinity Online Service (IOS) updated

New product - Xiaomi country check by imei

2019-10-19 Infinity Online Service (IOS) updated

New product - Xiaomi Mi Account remove (clean only) any model any country with cheaper price

2019-10-17 Infinity Online Service (IOS) updated

New product - Xiaomi get imei by 12-symbols unlock-number

2019-08-25 Infinity Online Service (IOS) updated

`Xiaomi Mi Account remove` service available for units that can not be connected to PC to read imei. See more in IOS product description and order form.

2019-08-19 Infinity Online Service (IOS) updated

`Meizu Flyme Account remove any model any country` service launched in test mode

Read more here

2019-08-14 Infinity Online Service (IOS) updated

Time limited action - `Xiaomi Mi Account remove` services become cheaper

Read more here

2019-07-25 Infinity-Box [BEST] NK2 v1.18 - important fix for v1.17

You can download complete v1.18 package as well as v1.18-exe-only if you have v1.17 installed

- Base
Flash engine revised ( N 2/2.1/5/6 flashing fixed )
Format FS / FRP reset revised

Other minor changes and fixed

Read more here

2019-07-25 Infinity-Box [BEST] NK2 v1.17 - All New and Old HMD support activated

HMD N 1 **
TA-1060, TA-1056, TA-1047, TA-1079, TA-1066

HMD N 1 Plus **
TA-1130, TA-1123, TA-1111, TA-1127

HMD N 2 *
TA-1035, A-1029, TA-1023, TA-1011, TA-1007

HMD N 2.1 *
TA-1086, TA-1084, TA-1092, TA-1093, TA-1080

HMD N 2.2 **
TA-1183, TA-1184, TA-1188

HMD N 3 **
TA-1028, TA-1038, TA-1032, TA-1020

HMD N 3.1 **
TA-1074, A-1070, TA-1063, TA-1057, TA-1049

HMD N 3.1 Plus **
TA-1125, TA-1124, TA-1118, TA-1117, TA-1115, TA-1113, TA-1104

HMD N 3.2 *
TA-1154, TA-1156, TA-1159, TA-1161, TA-1164

HMD N 4.2 *
TA-1133, TA-1149, TA-1150, TA-1152, TA-1157

HMD N 5 *
TA-1044, TA-1027, TA-1024, TA-1053

HMD N 5.1 **
TA-1088, TA-1081, TA-1075, TA-1061

HMD N 5.1 Plus **
TA-1120, TA-1112, TA-1108, TA-1105, TA-1102

HMD N 6 *
TA-1033, TA-1039, TA-1025, TA-1021, TA-1000, TA-1003

HMD N 6.1 *
TA-1043, TA-1016, TA-1045, TA-1050, TA-1054, TA-1068, TA-1089

HMD N 6.1 Plus *
TA-1116, TA-1103, TA-1083

HMD N 7 *
TA-1041

HMD N 7.1 *
TA-1100, TA-1096, TA-1095, TA-1085

HMD N 7 Plus *
TA-1062, TA-1062, TA-1055, TA-1046

HMD N 8 *
TA-1012, TA-1004, TA-1052

HMD N 8.1 *
TA-1128, TA-1121, TA-1119

HMD N 8 Sirocco *
TA-1042, TA-1005

HMD N 9 PureView *
TA-1094, TA-1087, TA-1082

HMD N X71 *
TA-1172


For now the next features are supported:
> Firmware flashing ( Factory / BEST firmware packages )
> Format FS / Reset Settings
> Reset FRP
> Identify

Info marks:
* - Device require Remote Authentification Server ( credit cost - 0 for now )
** - Device supported / supported already STANDALONE

- Base
Support for old HMD line over RAS for QCOM models
Support for new HMD line - WT/HQ activated - 2.2, 3.2, 4.2 ( over RAS for QCOM models )
Loader database updated
ModelFinder updated
FileSystem toolkit updated, changed FormatFS for all SP lines
SW/HW/Cross-avoid check activated for BL update mode
Bugfixes and minor changes

- MTK SP
Updated loader database
Boot log now show also ARB state and other service info
Automatic backup for critical partitions activated

- MTK FP
SWVersion check revised
FlashEngine updated
FileSystem (Forensic) engine updated

- SPD FP
Backup / Restore security activated
FlashEngine revised

- Support
Some firmwares for wide range of QCOM/MTK HMD Smartphones can be found on support area

Read more here

2019-07-24 Infinity Online Service (IOS) updated

New product - Xiaomi Mi Account remove (clean, lost) any model Uzbekistan

Read more here

2019-07-03 Infinity Online Service (IOS) updated

- Micro-Box support renew for Infinity activation become much cheaper than before
- 2 years renew available for Micro-Box activation for Infinity

2019-05-19 Infinity Online Service (IOS) updated

`Infinity-Box/Dongle software activation for Infinity CDMA-Tool` promotional price is discontinued, activation price returned back to it's standard value

(c) Infinity-Box 2005-2021